Installation

Before installing, make sure you have ngspice’s shared library installed at /usr/local/lib/. To do so, first download ngspice from ngspice’s sourceforge page. Then run the following commands:

$ tar xvzf ngspice-26.tar.gz
$ cd ngspice-26
$ mkdir release
$ cd release
$ ../configure --with-ngshared
$ make
$ sudo make install

If all goes well, the library should be installed in /usr/local/lib. If not, please consult ngspice’s installation instructions.

Once the library is installed, simply run,

$ pip3 install git+https://github.com/ashwith/ngspicepy

Note that ngspicepy requires python 3.5.